C925 MarkNet N8130 Fiber Ethernet 100BaseFX, 10BaseFL Print Server

Network Protocol Support

MarkNet print servers and the standard Ethernet connection support these protocols: TCP/IP IPV4, TCP/IP IPv6, Novell (IPX/SPX including NetWare Directory Services), AppleTalk™ and LexLink (DLC/LLC). All protocols can be active simultaneously. Simultaneous protocol support allows you to print from different systems without reconfiguring the print server.

Simple to set up or upgrade

The firmware resides in flash memory which allows upgrades via software download. Firmware upgrades are flashable and can simultaneously address multiple devices. Management is simplified by network settings that can be established either automatically or remotely - configure using MarkVision, command line or the GUI utilities.

Network Communications Security

SNMPv3, IPSec and 802.1x authentication provide security measures for communications and data encryption in supported printers and MFPs. SNMPv3 supports encrypted and authenticated management traffic protecting remote configuration and device status messages. IPSec can be used with both TCP/IP IPv4 and IPv6 networks and provides encryption and authentication of communications at the network layer.

Embedded Web Page

The embedded web page allows administrators to flash update printer firmware or access printer settings using a web browser to easily monitor printer status and change default settings.

Benefit from fiber optics

An internal print server to connect to a 100BaseFX or a 10BaseFL fiber optic network using a ST connector. No EMF emissions by design and works in electrically noisy environments such as a factory or warehouse. Locate your printer or MFP thousands of feet (hundreds of meters) away from the wiring closet.